The green movement in the United States is affecting all sorts of different industries for the better. Everything from manufacturing to coffee making services are getting a green makeover these day. For instance, did you know that a circulating fluidized bed is a clean process with the ability to lower emissions and pollutants? If you need to find some new and innovative ways to do your business, here are a few important facts you need to know about powder paint fluid bed manufacturing.
A fluidized bed is formed when a quantity of a solid particulate substance, this usually is present in a holding vessel, is placed under appropriate conditions to cause the solid and fluid mixture to behave as a fluid. This is usually achieved by the introduction of pressurized fluid through the particulate medium. This results in the medium then having many properties and characteristics of normal fluids. Some of the most important properties of these powder paint fluid bed mixtures are the ability to free flow under gravity, or to be pumped using fluid type technologies.
The resulting phenomenon is called fluidization. Fluidized beds are used for several purposes, such as fluidized bed reactors (types of chemical reactors), fluid catalytic cracking, fluidized bed combustion, heat or mass transfer or interface modification, such as applying a coating onto solid items. This technique is also becoming more common in Aquaculture for the production of shellfish in Integrated Multi-Trophic Aquaculture systems.
A fluidized bed, or powder paint fluid bed, consists of fluid to solid mixture that exhibits fluid like properties. Because of this, the upper surface of the bed is relatively horizontal. The bed can be considered to be a heterogeneous mixture of fluid and solid that can be represented by a single bulk density. This might not seem all that relevant to most people’s interests, but fluid bed coffee roasters offer extremely fresh, well roasted coffee in a time efficient manner. These types of emerging technologies have an endless amount of functionality.
In the early 1940’s, fluid beds were only used to turn coal into gas in Europe. This was until later in the 1940’s when it was realized that it could be used for a wide array of chemical processes. For instance, typically, pressurized gas or liquid enters the fluidized bed vessel through numerous holes via a plate known as a distributor plate, located at the bottom of the fluidized bed. The fluid flows upward through the bed, causing the solid particles to be suspended. If the inlet fluid is disabled, the bed may settle, pack onto the plate or trickle down through the plate. Many industrial beds use a sparger distributor instead of a distributor plate. The fluid is then distributed through a series of perforated tubes. Continue reading here: www.cpfd-software.com
